Connect with us

News

Tesla updates Model Y production rate, increased capacity at Fremont

The Tesla Model Y crossover. (Credit: Edmunds/Twitter)

Published

on

Tesla gave several updates regarding production rates of the Model Y during the first half of 2020, along with the company’s plans to begin increasing build capacity at the Fremont manufacturing plant in Northern California.

Tesla released the details in its Q2 2020 Earnings Update Letter, where it outlined its fourth profitable quarter in a row, which was a company record.

In Fremont, Tesla outlined its production of the Model Y during the first two quarters of 2020.

“Although the Model Y production line was operating for about four months in the first half of 2020 due to shutdowns, we exited Q2 with Model Y production running at installed capacity,” Tesla said.

The company’s ability to ramp the production of a new vehicle so quickly was significantly faster than the ramp of the Model 3.

Advertisement

“This ramp was significantly faster than our initial Model 3 ramp, which took over nine months to reach the same weekly rate.”

Tesla dealt with a month and a half-long shutdown at the Fremont facility from March 23 to May 10 due to COVID-19. However, CEO Elon Musk voluntarily reopened the facility. The company then received permission from Alameda County Health Officials to begin work operations the following week.

Additionally, Tesla confirmed that it was installing additional machinery at the Fremont facility, which is aimed toward increasing the total annual output of its Model 3 and Model Y vehicles.

“We are installing additional machinery at the Fremont Factory, which is expected to increase total Model 3 / Model Y capacity from 400,000 to 500,000 units per year,” the company stated in the Update Letter.

On July 15, it was reported that Tesla had submitted multiple applications that would expand the facility’s Model Y production lines in General Assembly 4.5. Not only would GA 4.5 be broadened, but another form hinted toward a second die-cast machine that would give the company the ability to manufacture the Model Y with a single-piece casting design.

Advertisement

Currently, the company is capable of building 400,000 Model Y and Model 3 vehicles every year. Due to the increased demand for its two mass-market cars, Tesla is preparing to begin a push toward a higher production rate.

The production rate of the Model 3 and Model Y at Fremont has been at 400,000 annual units since the Q4 2019 update. Two quarters later, Tesla is preparing for a massive push of its Model 3 sedan and Model Y crossover as demand continues to skyrocket across the United States.

The Model Y will also be built at the company’s newest U.S. facility, whose location has been chosen but not yet released.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla might be doing away with a long-included feature with its vehicles

It appears Tesla is mulling the possibility of not including key cards with its vehicles any longer.

Published

on

Credit: Tesla

Tesla might be doing away with a long-included feature with its vehicles, as it could be looking to phase out something that very few owners utilize.

Tesla Key Cards are included when you purchase your vehicle, and they assist in the initial setup process. However, after that, they are not super useful or relevant to the owner, as many rely on their Phone Key through the Tesla App to access their cars.

As such, it appears Tesla is mulling the possibility of not including key cards with its vehicles any longer. According to some language that has been removed from vehicle Owner’s Manuals that talks about the inclusion of key cards with the car upon delivery:

“Tesla provides you with two Model 3/Y key cards, designed to fit in your wallet.”

That sentence was removed from Owner’s Manuals, according to Not a Tesla App, which first spotted the change.

Advertisement

Tesla Model 3 owner implants RFID key card chip into her arm as ultimate hack to unlock door

Interestingly, the timing of the phrase being removed from Owner’s Manuals comes just after Tesla launched its “affordable” Standard Models, and could be a small money-saving measure for the company.

Key Cards have been utilized by Tesla for its cars since 2017, as they became an included accessory with the vehicle. They still have their place and are useful for other applications, such as Valet service and even to be used by car owners if their phone is dead or if someone else needs to get into the car.

They can also be purchased in the Tesla Shop for $40.

It seems as if Tesla is planning to have owners be completely reliant on the Phone Key, which is more useful and convenient than carrying around the Key Cards.

Advertisement

Although it is minor, it is yet another strategy Tesla is using to trim any sort of costs that can be eliminated and could save money in the long run.

Continue Reading

News

Elon Musk confirms Tesla FSD V14.2 will see widespread rollout

Musk shared the news in a post on social media platform X.

Published

on

Credit: Whole Mars Catalog/X

Elon Musk has confirmed that Tesla will be implementing a wide rollout of Full Self-Driving (FSD) V14 with the system’s V14.2 update. Musk shared the news in a post on social media platform X. 

FSD V14.1.2 earns strong praise from testers

Musk’s comment came as a response to Tesla owner and longtime FSD tester AI DRIVR, who noted that it might be time to release Full Self-Driving to the fleet because V14.1.2 has already become very refined.

“95% of the indecisive lane changes and braking have been fixed in FSD 14.1.2. I haven’t touched my steering wheel in two days. I think it’s time, Tesla AI,” the longtime FSD tester wrote

AI DRIVR’s comment received quite a bit of support from fellow Tesla drivers, some of whom noted that the improvements that were implemented in V14.1.2 are substantial. Others also agreed that it’s time for FSD to see a wide release.

In his reply to the FSD tester, CEO Elon Musk noted that FSD V14’s wide release would happen with V14.2. “14.2 for widespread use,” Musk wrote in his reply

Advertisement

Mad Max mode makes headlines

One of the key features that was introduced with FSD’s current iteration is Mad Max mode, which allows for higher speeds and more frequent lane changes than the previous “Hurry” mode. Videos and social media posts from FSD testers have shown the system deftly handling complex traffic, merging seamlessly, and maintaining an assertive but safe driving behavior with Mad Max mode engaged.

Tesla AI head Ashok Elluswamy recently noted in a post on X that Mad Max mode was built to handle congested daytime traffic, making it extremely useful for drivers who tend to find themselves in heavy roads during their daily commutes. With Musk now hinting that FSD V14.2 will go on wide release, it might only be a matter of time before the larger Tesla fleet gets to experience the notable improvements of FSD’s V14 update.

Continue Reading

News

Multiple Tesla Cybercab units spotted at Giga Texas crash test facility

The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size.

Published

on

Credit: @JoeTegtmeyer/X

It appears that Tesla is ramping up its activities surrounding the development and likely initial production of the Cybercab at Giga Texas. This was, at least, hinted at in a recent drone flyover of the massive electric vehicle production facility in Austin. 

Cybercab sightings fuel speculations

As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.

The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.

Cybercab production targets

This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.

The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.

Advertisement
Continue Reading

Trending