Tesla is asking a federal court to force a Cybertruck parts supplier to hand back manufacturing equipment the automaker says it owns, warning that production of the pickup could stop within days without it.

The company filed an emergency lawsuit in the U.S. District Court for the Western District of Texas, asking for a hearing on short notice to recover tooling used to stamp Cybertruck components at Giga Texas. According to the complaint, first reported by Bloomberg, the equipment sits inside a Troy, Texas plant run by Angstrom Automotive Group, which bought the facility from Anderton Casting last year and kept it on as a Tesla supplier. Case 6:26-cv-0477 is one of the more urgent supplier disputes Tesla has brought to court.

Tesla Cybertruck is officially the safest pickup, IIHS says

The dispute traces back to July 13, when Angstrom told Tesla it planned to close the Troy facility. The two sides then failed to agree on a plan to retrieve the die-cast tools, trim dies, fixtures, cutting tools, gauges and X-ray equipment that belong to Tesla. A shipment of 700 finished parts due out on July 17 never left the building, according to the filing. When Tesla sent representatives to the plant on July 21, accompanied by law enforcement, they were turned away.

Tesla’s complaint alleges Angstrom then asked for an extra $250,000 a week to keep the facility running, a demand the automaker calls an attempt to exert commercial pressure by holding its own property “for ransom.” Angstrom has not issued a public response.

The lawsuit states thousands of Cybertrucks already assigned to customers are tied to the parts in question, and that supply will run out “in mere days” without court intervention. Tesla says it is not asking the judge to resolve the underlying contract dispute or award damages, only to get physical access to equipment it already owns.

Tesla has also turned to the courts before to protect its supply chain, including its ongoing trade secret fight with former battery equipment supplier Matthews International, where a judge issued a permanent injunction against the company earlier this year.

Advertisement

-

-

A ruling on Tesla’s request for emergency relief is expected within days.

Tesla’s latest 2026 Summer Update quietly closes out one of the more tedious steps in personalizing a Tesla’s digital appearance. Uploading a custom wrap design used to require a USB drive. Now it doesn’t.

The feature is listed in Tesla’s release notes as “Send Custom Wraps from Mobile App.” The company described it plainly: “Skip the USB drive and upload a custom wrap of your car from the mobile app. Instructions for creating a custom wrap here: github.com/teslamotors/custom-wraps.”

The digital wrap tool has been around since Tesla’s 2024 Holiday Update, when it launched for Cybertruck owners first, as Teslarati reported at the time. Getting a design onto the car meant formatting a USB drive, creating a folder named exactly “Wraps,” dropping in PNG files sized between 512×512 and 1024×1024 pixels and under 1 MB each, then plugging the drive in and applying the wrap through Toybox. Tesla expanded the tool to other models and renamed it from “Colorizer” to “Paint Shop” with the 2025 Holiday Update, while also adding license plate and window tint customization alongside the wraps.

Custom wraps via mobile app https://t.co/5OydZ26g9p pic.twitter.com/uexU0ZePxu

— Tesla (@Tesla) July 22, 2026

The latest Summer Update removes the USB step from that process. Owners will be able to pull a design from wherever they saved it, whether that’s a download from social media or something built from Tesla’s own GitHub templates, and push it to the car directly through the app.

Tesla reveals 2026 Summer Update with crazy fixes to Nav and more

Advertisement

-

-

It’s a small fix relative to the rest of this latest release, which also included expanded Grok voice commands, automatic navigation that learns regular routes, and self-driving stats inside the mobile app, all detailed in our rundown of the full Summer Update. The USB requirement was one of the more common complaints about Paint Shop since it launched. Tesla did not say when the wrap upload change would reach individual vehicles, only that the broader update is rolling out now in waves.

The Insurance Institute for Highway Safety (IIHS) has awarded the 2025-2026 Tesla Cybertruck crew cab pickup its highest honor: Top Safety Pick+. This marks the Cybertruck as the only full-size pickup to achieve this distinction in recent evaluations.

The award applies specifically to vehicles built after April 2025, following structural upgrades including front underbody reinforcements and footwell modifications.

These changes enabled strong performance in updated crash tests. The Cybertruck earned “Good” ratings in the small overlap front (driver and passenger sides), updated moderate overlap front, and updated side tests—core requirements for the Top Safety Pick+ designation.

It also secured acceptable or good headlights across trims and a “Good” rating for its standard front crash prevention system in pedestrian scenarios, along with acceptable or good performance in vehicle-to-vehicle testing.

The Cybertruck avoided every single pedestrian collision, including:

• Daytime child crossing
• Nightitime adult crossing
• Night parallel adult

In IIHS pedestrian front crash prevention tests, @Cybertruck avoided every single collision – daytime, nighttime & different angles

It was also the only pickup to earn Top Safety Pick+ (highest award) in 2026https://t.co/BNPqT9TbsW pic.twitter.com/M6nwDisBFK

— Tesla (@Tesla) June 24, 2026

Advertisement

-

-

In the large pickup category, competitors such as the Toyota Tundra received only a standard Top Safety Pick, while the Ford F-150 and Ram 1500 did not qualify for either award. This positions the Cybertruck as a standout in occupant protection and crash avoidance among its peers.

Credit: IIHS

Ironically, the same vehicle celebrated for superior U.S. safety performance remains banned from public roads in the United Kingdom and much of Europe. Regulators there cite the Cybertruck’s sharp external edges and highly rigid stainless-steel construction as failing pedestrian-protection standards. European and UK rules require rounded surfaces on protruding parts to minimize injury risk in collisions with vulnerable road users.

Critics also point to the truck’s substantial weight and unyielding body structure, which some argue could transfer more force to other vehicles or pedestrians rather than absorbing it.

Tesla’s engineering philosophy underpins the Cybertruck’s strong IIHS results. The vehicle features a distinctive stainless-steel exoskeleton made from ultra-hard 30X cold-rolled stainless steel. This provides exceptional structural rigidity and a robust safety cage that resists deformation in side impacts and rollovers.

Engineers designed integrated load paths to channel crash forces away from the occupant compartment while allowing controlled energy absorption in key zones. Post-April 2025 refinements to the front underbody further optimized performance in overlap crashes.

Complementing the passive structure is Tesla’s advanced active safety suite, including the standard Collision Avoidance Assist system with automatic emergency braking. This contributed directly to the vehicle’s strong front crash prevention scores. The skateboard platform and low center of gravity also enhance stability and handling, reducing the likelihood of certain crashes.

The IIHS recognition highlights how Tesla’s combination of high-strength materials, structural innovation, and software-driven safety systems can deliver top-tier protection in rigorous testing. While global regulatory differences on design and pedestrian interaction continue to limit the Cybertruck’s availability outside North America, its U.S. safety credentials set a new benchmark for full-size pickups.

Advertisement

-

-