News
Tesla safety tech takes giant step with FCC approval for wave sensor
Tesla’s request for the Federal Communications Commission (FCC) to approve a millimeter-wave sensor for child protection and anti-theft measures has been granted. Along with five other companies, Tesla received “a grant of waivers” on April 14, 2021, that would allow the installation of radar sensors in the 57-64 GHz frequency band in passenger motor vehicles. The system is now likely to contribute to the imminent release of a driver monitoring system, which would keep drivers attentive during the use of the company’s Full Self-Driving suite.
The document also granted Vayyar Imaging Ltd., Valeo North America, Infineon Technologies America Corp, IEE Sensing Inc., and Brose North America to use millimeter-wave sensors. Tesla and IEE were approved for 60-64 GHz, while the other companies can utilize 57-64 GHz.
Millimeter-Wave Sensor
In August 2020, Teslarati reported that Tesla had requested the FCC to approve a short-range motion sensor that would save kids from being left in hot cars. The sensor would also boost the company’s theft-prevention system as it would be active “approximately 6 feet” outside of the vehicle “to provide vehicle security benefits such as detecting a broken window or a vehicle intrusion.” Tesla originally filed for a request for a waiver on July 31, 2020.
After a few months of research and deliberation, the FCC is waiving requirements that would prohibit the approval of these systems. The government agency says that “We find that grant of these waivers…will bring immediate relief to the industry and the public in this area. Specifically, our action will bring forth substantial public benefits by improving vehicular safety for children and providing opportunities for additional vehicular automation and theft prevention applications without increasing the potential for harmful interference to authorized users in the band.”
The Sensor’s use for Driver Monitoring for Full Self-Driving
New FCC documents obtained by Teslarati indicate that Tesla’s device “will use 4 transmit and 3 receive antennas driven by a highly configurable radar front-end unit and in-vehicle radar modulation will consist of consecutive frames, including an acquisition sequence comprised by a repetition of frequency chirps or stepped chirps, a listening period, then a period for signal processing.” However, there may be more uses for the sensor, which aligns with the company’s current plans to monitor driver behavior and attentiveness during the use of Autopilot or Full Self-Driving.
The documents state:
“Tesla identifies some potential use cases—child detection, cabin intrusion, and exterior detection—for which sensing would occur only while the vehicle is stationary; and other use cases—occupant detection and classification—for which the device would sense both while the vehicle is stationary and while in motion; and one use case—driver’s vital signs monitoring—for which the device would sense only while the vehicle is in motion.”
The device, along with the vehicle’s interior cabin camera, will monitor facial features and vital signs to ensure that a driver is paying attention. Tesla recently revoked access to its FSD Beta program to some owners as they did not remain sufficiently attentive while utilizing the FSD Suite.
Tesla officially expands FSD Beta test field while revoking access to the irresponsible
In early April, Tesla hacker green released footage of the Driver Monitoring system, showing how the interior cabin camera would constantly look at the driver’s facial features. This would ensure that a driver using the FSD or Autopilot systems is still paying attention to the road. Because Tesla’s FSD isn’t operating with Level 5 autonomy, it still requires the driver to pay attention to the road and the vehicle’s surroundings.
By popular demand, night footage with Tesla DMS detections.
It’s not perfect but workable with street lights and whatnot (as suspected)
Full 23.5 minutes footage on youtube: https://t.co/AZSpN3ZoFi
No idea why Dark/blinded top out at 50% only.
reworked display.@rice_fry pic.twitter.com/FiF6i33XGZ— green (@greentheonly) April 8, 2021
Advocates for Highway and Auto Safety believe that the inclusion of the sensor could be highly advantageous for autonomous vehicles. “The ability of a vehicle to detect and classify all occupants will likely be critical as autonomous vehicles (AVs) are deployed onto our roads in the future… because…AVs will need to know the number of occupants and whether they are properly restrained before beginning to move,” safety advocates said.
Child Safety and Anti-Theft Devices
The device was originally going to be used to detect children left in a hot car. The system “provides depth perception and can ‘see’ through soft materials, such as a blanket covering a child in a child restraint,” according to Tesla’s original filing. The device “can differentiate between a child and an object left on the seat, reducing the likelihood of false alarms,” Tesla said. It can also detect “micromovements like breathing patterns and heart rates, neither of which can be captured by cameras or in-seat sensors alone.” Google was granted the use of a device “under the same technical parameters” by the FCC in 2018.
The device would also be able to detect intrusions of theft attempts, which could be coupled with the highly effective Tesla Sentry Mode. Sentry Mode records events that occur near the vehicle and has helped police crack several vandalism and robbery cases in the past.
The National Highway Traffic Safety Administration says that 105 kids were killed in 2018 and 2019 because of being left in a hot car. The death occurred 54% of the time because someone forgot their child was in the car. The approval of the millimeter-wave sensor could decrease that number significantly if it receives widespread approval after Tesla’s usage.
The use of the sensor is immediately effective. “Accordingly, pursuant to authority in Sections 0.31, 0.241, and 1.3 of the Commission’s rules, 47 CFR §§ 0.21, 0.241, and 1.3, and Sections 4(i), 302, 303(e), and 303(r) of the Communications Act of 1934, as amended, 47 U.S.C. §§ 154(i), 302, 303(e), and 303(r), IT IS ORDERED that the Request for Waiver filed by Tesla Inc. IS GRANTED, consistent with the terms of this Order. This action is effective upon release of this Order.”
The FCC’s grant documentation is available below.
DA-21-407A1 (1) by Joey Klender on Scribd
News
Tesla hints at Starlink integration with recent patent
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
Tesla hinted at a potential Starlink internet terminal integration within its vehicles in a recent patent, which describes a vehicle roof assembly with integrated radio frequency (RF) transparency.
The patent, which is Pub. No U.S. 2025/0368267 describes a new vehicle roof that is made of RF-transparent polymer materials, allowing and “facilitating clear communication with external devices and satellites.”
Tesla believes that a new vehicle roof design, comprised of different materials than the standard metallic or glass elements used in cars today, would allow the company to integrate modern vehicular technologies, “particularly those requiring radio frequency transmission and reception.
Tesla has recently filed a US patent application on integrating RF transparent materials into the roof structure.
“facilitating clear communication with external devices and satellites”
Tesla fleet is getting @Starlink connectivity integration soon. LFG @Tesla @elonmusk… pic.twitter.com/bLa8YtPLd1
— Chansoo Byeon (@Chansoo) December 9, 2025
Instead of glass or metallic materials, Tesla says vehicles may benefit from high-strength polymer blends, such as Polycarbonate, Acrylonitrile Butadiene Styrene, or Acrylonitrile Styrene Acrylate.
These materials still provide ideal strength metrics for crashworthiness, stiffness for noise, vibration, and harshness control, and are compliant with head impact regulations.
They would also enable better performance with modern technologies, like internet terminals, which need an uninterrupted signal to satellites for maximum reception. Tesla writes in the patent:
“By employing polymer blends, some examples enable RF transmission from all the modules to satellites and other communication devices both inside and outside the vehicle.”
One of the challenges Tesla seems to be aware of with this type of roof design is the fact that it will still have to enable safety and keep that at the forefront of the design. As you can see in the illustration above, Tesla plans to use four layers to increase safety and rigidity, while also combating noise and vibration.
It notes in the patent that disclosed examples still meet the safety requirements outlined in the Federal Motor Vehicle Safety Standards (FMVSS).
Starlink integrated directly into Tesla vehicles would be a considerable advantage for owners. It would come with a handful of distinct advantages.
Initially, the inclusion of Starlink would completely eliminate cellular dead zones, something that is an issue, especially in rural areas. Starlink would provide connectivity in these remote regions and would ensure uninterrupted service during road trips and off-grid adventures.
It could also be a critical addition for Robotaxi, as it is crucial to have solid and reliable connectivity for remote monitoring and fleet management.
Starlink’s growing constellation, thanks to SpaceX’s routine and frequent launch schedule, will provide secure, stable, and reliable internet connectivity for Tesla vehicles.
Although many owners have already mounted Starlink Mini dishes under their glass roofs for a similar experience, it may be integrated directly into Teslas in the coming years, either as an upgrade or a standard feature.
News
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
It seems Tesla was waiting for the Hardware 4 rollout, as it wanted to also deploy a new Full Self-Driving version to those owners, as it appeared in the release notes for the Holiday Update last night.
Tesla has surprised some owners by sneaking in a new Full Self-Driving version with the wide release of the Holiday Update, which started rolling out to Hardware 4 owners on Friday night.
Tesla has issued a controlled and very slow release pattern with the Holiday Update, which rolls out with Software Version 2025.44.25.5.
For the past two weeks, as it has rolled out to Hardware 3 and older Tesla owners, the company has kept its deployment of the new Software Version relatively controlled.
It seems Tesla was waiting for the Hardware 4 rollout, as it wanted to also deploy a new Full Self-Driving version to those owners, as it appeared in the release notes for the Holiday Update last night.
Tesla Full Self-Driving v14.2.1.25 made its first appearance last night to Hardware 4 owners who are members of the Early Access Program (EAP). It appears to be a slight refinement from FSD v14.2.1, which has been out for a couple of weeks.
Tesla v2025.44.25.5 Holiday update incoming
Also Full Self-Driving v14.2.1.25!!! pic.twitter.com/74D7S0UGXz
— TESLARATI (@Teslarati) December 13, 2025
Many owners welcome the new FSD version, us included, because we’ve been less than impressed with v14.2.1. We have experienced some minor regressions with v14.2.1, especially with Speed Limit recognition, Speed Profile tinkering, and parking performance.
As it stands, Full Self-Driving is still particularly impressive, but Tesla is evidently having an issue with some of the adjustments, as it is still refining some of the performance aspects of the suite. This is expected and normal with some updates, as not all of them are an improvement in all areas; we routinely see some things backtrack every once in a while.
This new FSD version is likely to take care of those things, but it also includes all of the awesome Holiday Update features, which include:
- Grok with Navigation Commands (Beta) – Grok will now add and edit destinations.
- Tesla Photobooth – Take pictures inside your car using the cabin-facing camera
- Dog Mode Live Activity – Check on your four-legged friend on your phone through periodic snapshots taken of the cabin
- Dashcam Viewer Update – Includes new metrics, like steering wheel angle, speed, and more
- Santa Mode – New graphics, trees, and a lock chime
- Light Show Update – Addition of Jingle Rush light show
- Custom Wraps and License Plates – Colorizer now allows you to customize your vehicle even further, with custom patterns, license plates, and tint
- Navigation Improvements – Easier layout and setup
- Supercharger Site Map – Starting at 18 pilot locations, a 3D view of the Supercharger you’re visiting will be available
- Automatic Carpool Lane Routing – Navigation will utilize carpool lanes if enabled
- Phone Left Behind Chime – Your car will now tell you if you left a phone inside
- Charge Limit Per Location – Set a charge limit for each location
- ISS Docking Simulator – New game
- Additional Improvements – Turn off wireless charging pad, Spotify improvements, Rainbow Rave Cave, Lock Sound TRON addition
Tesla also added two other things that were undocumented, like Charging Passport and information on USB drive storage to help with Dashcam.
Tesla is updating Cybertruck owners on its timeline of a massive feature that has yet to ship: Powershare with Powerwall.
Powershare is a bidirectional charging feature exclusive to Cybertruck, which allows the vehicle’s battery to act as a portable power source for homes, appliances, tools, other EVs, and more. It was announced in late 2023 as part of Tesla’s push into vehicle-to-everything energy sharing, and acting as a giant portable charger is the main advantage, as it can provide backup power during outages.
Cybertruck’s Powershare system supports both vehicle-to-load (V2L) and vehicle-to-home (V2H), making it flexible and well-rounded for a variety of applications.
However, even though the feature was promised with Cybertruck, it has yet to be shipped to vehicles. Tesla communicated with owners through email recently regarding Powershare with Powerwall, which essentially has the pickup act as an extended battery.
Powerwall discharge would be prioritized before tapping into the truck’s larger pack.
However, Tesla is still working on getting the feature out to owners, an email said:
“We’re writing to let you know that the Powershare with Powerwall feature is still in development and is now scheduled for release in mid-2026.
This new release date gives us additional time to design and test this feature, ensuring its ability to communicate and optimize energy sharing between your vehicle and many configurations and generations of Powerwall. We are also using this time to develop additional Powershare features that will help us continue to accelerate the world’s transition to sustainable energy.”
Owners have expressed some real disappointment in Tesla’s continuous delays in releasing the feature, as it was expected to be released by late 2024, but now has been pushed back several times to mid-2026, according to the email.
Foundation Series Cybertruck buyers paid extra, expecting the feature to be rolled out with their vehicle upon pickup.
Cybertruck’s Lead Engineer, Wes Morrill, even commented on the holdup:
As a Cybertruck owner who also has Powerwall, I empathize with the disappointed comments.
To their credit, the team has delivered powershare functionality to Cybertruck customers who otherwise have no backup with development of the powershare gateway. As well as those with solar…
— Wes (@wmorrill3) December 12, 2025
He said that “it turned out to be much harder than anticipated to make powershare work seamlessly with existing Powerwalls through existing wall connectors. Two grid-forming devices need to negotiate who will form and who will follow, depending on the state of charge of each, and they need to do this without a network and through multiple generations of hardware, and test and validate this process through rigorous certifications to ensure grid safety.”
It’s nice to see the transparency, but it is justified for some Cybertruck owners to feel like they’ve been bait-and-switched.
Tesla hints at Starlink integration with recent patent
Tesla supplements Holiday Update by sneaking in new Full Self-Driving version
