It appears that Tesla China has started its second-quarter vehicle delivery push. Similar to previous quarters, the electric vehicle maker seems to be focusing on exporting large batches of vehicles to foreign territories in Q2’s first half.
Tesla’s fresh batch of exports could be seen in aerial footage captured by drone operator Wu Wa, who has been chronicling the development of Tesla China’s facilities for years. The recently shared video shows numerous Teslas waiting to be exported at Shanghai Port. Interestingly enough, a number of the vehicles appear to be right-hand drive models.
The recent video is particularly interesting as it shows the car carrier ship Grand Champion docking at the Shanghai Port. The ship will likely be one of several which will be transporting Giga Shanghai-made vehicles to foreign territories.
As Tesla’s primary vehicle export hub, Giga Shanghai plays a critical role in the company’s global operations. With this in mind, Tesla China typically allots Giga Shanghai’s production on international orders during the first half of each quarter before shifting to domestic orders in the latter half. This system allows Tesla to cater to both foreign and domestic markets.
Apart from a busy Shanghai Port, other footage from the drone operator has shown that Giga Shanghai is currently undergoing upgrades in the form of solar panels on its roof. The installation of the solar panels seem to be in its initial phases, but it won’t be surprising if more sections of the Giga Shanghai complex are fitted with rooftop solar in the coming months.
In its Q1 2023 vehicle delivery and production report, Tesla disclosed reported a total of 422,875 vehicle deliveries, comprised of 412,180 Model 3/Y and 10,695 Model S/X units. Based on the Q1 results, it appears that Gigafactory Shanghai played a significant role, contributing to roughly 54% of the automaker’s worldwide deliveries during the first quarter. Considering Tesla’s 1.8 million goal this year, Tesla China would likely have to dig deep to ensure that it can play its role in the company’s overall operations perfectly.
Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.
News
Tesla Gigafactory Texas builds its half millionth vehicle
The milestone was shared via Twitter/X by the official @Gigafactories account.

Tesla’s Gigafactory Texas has officially rolled out its 500,000th vehicle, marking a significant achievement in the factory’s history and reinforcing its role as a central hub in Tesla’s vehicle manufacturing network.
The milestone was shared via Twitter/X by the official @Gigafactories account. “Congratulations to the Giga Texas team for building 500k vehicles,” the company’s X post read.
As could be seen in Tesla Manufacturing’s post, the Gigafactory Texas team celebrated the milestone by posting for a photograph with the facility’s half millionth unit, a white Tesla Model Y. The team held balloons that spelled “500K” on its commemorative photo.
Giga Texas, located near Austin, has ramped its operations since its launch, producing Tesla’s Cybertruck and Model Y. Crossing the half-million vehicle mark solidifies the facility’s importance to Tesla’s overall operations, especially considering the fact that the Model Y is the company’s best-selling vehicle.
While Giga Texas is just producing the Model Y and the Cybertruck for now, the facility is also poised to produce the Cybercab. The Cybercab is expected to be Tesla’s highest volume vehicle, with Elon Musk estimating that the company would be producing about 2 million units of the autonomous two-seater per year.
The Cybercab is unlike any vehicle that is currently produced today, and its production would be quite extraordinary. As per Elon Musk’s previous comments, the Cybercab’s manufacturing line would not look like an automotive production line at all. Instead, Musk noted that the Cybercab’s line in Gigafactory Texas would resemble a high-speed consumer electronics line instead.
“We do want to scale up production to new heights obviously with the Cybercab. Cybercab is not just revolutionary car design. It’s also a revolutionary manufacturing process. So I guess we probably don’t talk about that enough, but if you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line,” Musk previously stated.
News
Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized
Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier.

Tesla might have all but finalized the design for its Optimus V3 humanoid robot, at least if rumors from China prove accurate. As per recent reports, Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier, with deliveries expected sometime in the first quarter of 2026.
The volume of orders suggested by the reports from China suggests that the components will not just be used for Optimus prototypes.
The rumor
As noted in a report from Sina News, media outlets across China have recently reported that Tesla has placed a $685 million (5 billion RMB) order for linear actuators from Sanhua Intelligent Controls. The components will reportedly be used for the production of Optimus, which will likely be mass-produced in its V3 iteration. The reports claimed that the delivery of the actuators will likely start sometime in the first quarter of 2026.
Industry watchers have estimated that such a volume would be enough for about 180,000 Optimus robots. This suggests that while Tesla might not be able to start the initial production of its humanoid robots this year, the electric vehicle maker might be able to hit the ground running with its Optimus production next year. And as hinted at by Elon Musk’s comments on X, Tesla seems to be preparing to produce Optimus V3 en masse.
Company comments
The reports of Tesla’s alleged actuator orders have resulted in Sanhua Intelligent Controls’ stock rising. Interestingly enough, a Tesla China representative has stated that “no official information about this order that could be disseminated externally.” A representative from Sanhua, on the other hand, simply stated that the company’s robotics business is progressing smoothly, but they could not comment on market rumors.
While these reports are rumors for now, there are some optimistic hints that Tesla might have all but finalized the design for Optimus V3, and the company might be looking to start the robot’s production. For one, Sanhua is already a Tesla supplier, providing components for the company’s electric cars. A report from The Information also alleged that Tesla is no longer looking to produce 5,000 Optimus robots in 2025. This was reportedly due to challenges in the robot’s hands.
If Tesla is really starting to order large volumes of components for Optimus’ production, it would suggest that the company might have overcome the challenges it was facing with the humanoid robot earlier this year. It would then not be farfetched if Tesla were able to start the initial production of Optimus V3 next year.
News
Tesla eyes two new states for Robotaxi

Tesla has officially shown that it is eyeing two new states for Robotaxi operation in the U.S., as it hopes to add the new areas to its ever-growing list of places where the suite is either active or in the testing phase.
Tesla first launched its Robotaxi suite in Austin, Texas, in late June. It expanded the suite to the San Francisco Bay Area just a month later. Since then, it has not launched any public rides in any other states, but it has gained several approvals for early testing.
In preparation for operation in new states, Tesla routinely lists job postings on its Careers website, which helps align potential employees with opportunities ahead of regulatory approvals. This is a strategy that allows Tesla to start operations immediately upon licensing for testing.
Tesla started hiring Vehicle Operators for Autopilot in Arizona and Nevada months before the company gained any sort of approvals from state governments for Robotaxi. However, those approvals eventually came in the form of testing licenses, which allow the company to perform validation ahead of its public launch.
Tesla begins validating Robotaxi in a new area, hinting at expansion
Now, Tesla has posted job listings for Vehicle Operators for Autopilot in two new states: Colorado and Illinois. The Colorado job listing is located in Aurora, a suburb of Denver. Tesla is looking for Robotaxi operators in Chicago as well.
These postings hint toward Tesla’s continuing efforts to expand Robotaxi to new places. Earlier this year, CEO Elon Musk said the company would like to have Robotaxi available to at least half of the U.S. population.
It has expanded significantly since its initial launch in late June, but it is still a far way off from where Tesla would like it to be by year’s end.
So far, Tesla has job listings for Autopilot Vehicle Operators in Arizona, California, Texas, Florida, Colorado, Nevada, and Illinois.
-
News1 week ago
Tesla FSD (Supervised) V14.1 with Robotaxi-style dropoffs is here
-
Elon Musk2 hours ago
Starship’s next chapter: SpaceX eyes tower catch after flawless Flight 11
-
News1 week ago
Tesla all but confirms that affordable Model Y is coming Tuesday
-
Elon Musk2 weeks ago
Elon Musk announces ‘Grokipedia’ as Wikipedia alternative from xAI
-
News3 hours ago
Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized
-
Elon Musk1 week ago
Tesla releases cryptic teaser for something massive and it’s coming this week
-
Investor's Corner2 weeks ago
Tesla Q3 deliveries expected to exceed 440k as Benchmark holds $475 target
-
News1 week ago
Tesla plant manager tips off affordable model production