Connect with us

News

Tesla is performing Model Y Giga Press casting tests at Texas factory: rumor

Credit: Joe Tegtmeyer | Twitter | @JoeTegtmeyer

Published

on

Tesla’s Giga Texas production facility is rumoredly undergoing some test runs of the Model Y’s rear, one-piece casting months ahead of its scheduled initial production phases, according to some close to the project.

Tesla has spent the last year developing land and constructing its largest Gigafactory production facility to date in Austin, Texas. In what will eventually become a production facility that will supply the Eastern portion of North America with Model 3 and Model Y builds and the Cybertruck, Tesla has made tremendous progress in Austin. It appears that the company is already performing casting tests ahead of production phases.

According to Texas resident and frequent Giga Texas visitor Joe Tegtmeyer, who also flies drones over the site to track progress, a source close to the operation in Austin says that the first test casting was completed by Giga Press #1. The Giga Press is a large casting machine from IDRA, an Italian manufacturer. Tesla has utilized the Giga Press for the Model Y’s single-piece rear casting.

“I was given information by a reliable on-site source that late last evening…the first test casting was completed by Gigag Press #1! This was a Model Y rear casting,” Tegtmeyer said.

Tesla introduced the rear casting with the Model Y to eliminate an excessive number of parts that make up the frame of the car. Tesla went from 70 pieces to 1 single-piece with the introduction of the Giga Press and the single-piece casting, and it has been one way the automaker has increased production efficiency and build quality. Tesla also plans to use the Giga Press’s single-piece casting for the Cybertruck by using an over 8,000-tone-force machine. Giga Texas is not and will not be the only facility under Tesla ownership to utilize a Giga Press, either. There are currently three casting machines installed in China at Giga Shanghai, two at Tesla’s Fremont Factory in Northern California, and there will be Giga Presses at both Giga Texas and Giga Berlin, where the Model Y will be the top priority when production begins.

Tesla Gigafactory Texas gets its second Giga Press machine

The use of a casting machine to create a one-piece rear frame for the Model Y not only increases production efficiency and build quality but also improves vehicle safety in the event of a rear-end collision. While the Model Y and the Cybertruck will be using the Giga Press casting design in the near future, CEO Elon Musk said that the Model 3 would also eventually use a single-piece casting, just not anytime soon.

Musk said in an interview with Sandy Munro:

Advertisement

“At some point, we probably will switch to a single-piece casting, but I think we need to get the Texas factory and the Berlin factory going. We do have an issue. It is hard to change the wheels on the bus when it is going 80 MPH down the highway. So, Model 3 is…well, was most of our volume. Model Y will exceed Model 3, but we just need an opportunity to redo the factory without blowing the cash flow of the company.”

The news of Tesla performing casting test runs at Giga Texas only helps the company’s narrative that production will begin soon. Currently, Tesla’s contracted crews on the site are working to install and commission the machinery that will eventually pump out hundreds of thousands of electric vehicles every year.

Check out Joe Tegtmeyer’s most recent Giga Texas flyover below.

Advertisement

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla Cybertruck gets Full Self-Driving v14 release date, sort of

Published

on

Tesla Cybertruck owners are wondering when they will get access to the company’s Full Self-Driving version 14.1 that rolled out to other owners today for the first time.

Cybertruck owners typically receive Full Self-Driving updates slightly later than other drivers, as the process for the all-electric pickup is different. It is a larger vehicle that requires some additional attention from Tesla before FSD versions are rolled out, so they will be slightly delayed. CEO Elon Musk said the all-wheel steering technically requires a bit more attention before rollout as well.

After some owners got access to the v14.1 Full Self-Driving suite this morning, Cybertruck owners sought out a potential timeframe for when they would be able to experience things for themselves.

Advertisement

Tesla owners show off improvements with new Full Self-Driving v14 rollout

They were able to get an answer from Ashok Elluswamy, Tesla’s Head of AI, who said:

“We got you. Coming soon.”

Advertisement

The release of FSD v14.1 for Cybertruck will not be tempered, either. Elluswamy then confirmed that Tesla would be rolling out the full-featured FSD v14 for the pickup, meaning it would be able to reverse and park itself, among other features.

Elluswamy said it would be capable of these features, which were void in other FSD releases for Cybertruck in the past.

Tesla’s rollout of FSD v14.1 brings several extremely notable changes and improvements to the suite, including more refined operation in parking garages, a new ability to choose parking preferences upon arriving at your destination, a new driving mode called “Sloth,” which is even more reserved than “Chill,” and general operational improvements.

Those who were lucky enough to receive the suite have already started showing off the improvements, and they definitely seem to be a step up from what v13’s more recent versions were capable of.

CEO Elon Musk called v14 “sentient” a few weeks back, and it seems that it is moving toward that. However, he did state that additional releases with more capabilities would be available in the coming weeks, but many owners are still waiting for this first version.

Advertisement
Continue Reading

News

Tesla launches two new affordable models with ‘Standard’ Model 3, Y offerings

It is the first time Tesla has revealed any details about what it planned to launch in terms of its new, lower-cost vehicles, which are mainly aimed at countering the loss of the $7,500 EV tax credit.

Published

on

Credit: Tesla

Tesla has officially launched its affordable models with the new Model 3 and Model Y ‘Standard’ versions hitting the company’s Online Design Studio on Tuesday.

It is the first time Tesla has revealed any details about what it planned to launch in terms of its new, lower-cost vehicles, which are mainly aimed at countering the loss of the $7,500 EV tax credit.

Here’s what Tesla went with for its release of the new affordable models.

Tesla Model Y ‘Standard’

The Model Y Standard is a stripped-down version of the all-electric crossover and starts at $39,990.

Deliveries are slated for November and December, the company says if you plan to order one, and it comes with a few major changes to improve efficiency and bring down cost for owners.

Advertisement
  • New athletically tuned exterior and new alloy wheels to improve aerodynamics
  • 15.4″ touchscreen in the front, the same as the other trims
  • Available in three colors: Stealth Grey (free), White ($1,oo0 extra), Diamond Black ($1,500 extra)
  • Textile and vegan leather interior
  • Range sits at 321 miles
  • New front fascia
  • Covered glass roof (textile on inside)
  • Windows are not acoustically laminated for a quieter cabin
  • Manual mirrors and seats
  • Smaller frunk
  • No rear infotainment screen
  • No basic Autopilot
  • 69 kWh battery
  • New 19″ Aperture wheels
  • 0-60 MPH in 6.8 seconds
  • 7 speaker stereo, down from 15 speakers in premium models

Tesla Model 3 ‘Standard’

The Model 3 Standard was a surprise offering from Tesla, as many had only anticipated the company to refine and offer a more affordable version of the Model Y.

Coming in at $36,990, it features many of the same changes Tesla made with the Model Y “Standard,” all ways to improve price and make it less flashy than the more premium offerings.

Advertisement

Deliveries are also slated for November for this vehicle, and it features relatively the same stripped-down offerings as the Model Y Standard.

  • Available in three colors: Stealth Grey (free), White ($1,oo0 extra), Diamond Black ($1,500 extra)
  • Textile and vegan leather interior
  • Range sits at 321 miles
  • Covered glass roof (textile on inside)
  • Manual mirrors and seats
  • No rear infotainment screen
  • No basic Autopilot
  • 69 kWh battery
  • New 19″ Aperture wheels
  • 0-60 MPH in 6.8 seconds
  • 7 speaker stereo, down from 15 speakers in premium models
@teslarati 🚨 Tesla’s Affordable Models are here! Let’s talk about them! #tesla #fyp #viral #teslaev #elonmusk ♬ Natural Emotions – Muspace Lofi

Continue Reading

Elon Musk

Tesla owners show off improvements with new Full Self-Driving v14 rollout

Some of the big things that Tesla faced head-on with the development and release of v14 were navigating in parking garages and handling parking after arriving at a destination.

Published

on

Credit: Tesla Europe & Middle East/X

Tesla owners with access to the company’s Full Self-Driving new version, v14, which rolled out on Tuesday morning, are showcasing some of the very impressive improvements that have arrived.

CEO Elon Musk called v14 “sentient” a few weeks ahead of its rollout, claiming the newest iteration of the company’s Full Self-Driving platform would be the most accurate to date.

Tesla FSD (Supervised) V14.1 with Robotaxi-style dropoffs is here

It was obvious this narrative had Tesla owners keeping their expectations high, as there were very evidently things that needed to be improved upon that were present in v13. I wrote about several improvements I was hoping to see, and based on the release notes for v14, Tesla did have these things in the works already.

Some of the big things that Tesla faced head-on with the development and release of v14 were navigating in parking garages and handling parking after arriving at a destination.

Advertisement

Tesla said it was working to increase the capabilities of Summon within parking garages, as many owners believe that is where it would be the most beneficial.

While that does not appear to be part of this initial v14 rollout, it does seem Tesla is focused on improving the suite’s ability to navigate through these garages, including stopping for a ticket to enter the facility, finding a spot, and parking in an appropriate space.

It was evident this was a huge improvement based on one example from an owner who received v14:

If you look closely, you will even see the car shift slightly to the right when it arrives at the ticketing station, making it easier for the driver to hand over their ticket and payment. It then moves back out to the right when leaving to return to the center of the lane. It’s very intuitive.

Additionally, it appears to be more accurate when parking, thanks to improvements that enable owners to select the type of parking upon arrival at a destination.

In the v14.1 release notes, Tesla said that it has added “Arrival Options for you to select where FSD should park: in a Parking Lot, on the Street, in a Driveway, in a Parking Garage, or at the Curbside.”

One owner chose to navigate home and chose a garage to park in. Full Self-Driving performed it without any issues:

Advertisement

These are just two evident improvements so far, and there are likely many more on the way. The changes and fixes will be tracked by anyone with access to FSD v14 in the coming weeks.

Continue Reading

Trending