News
Tesla Gigafactory 3 construction in China begins with rapid buildout of perimeter fence
Tesla’s Gigafactory 3 in Shanghai is beginning to take shape, with construction work on the facility entering its first phases. Drone footage taken last Wednesday, for one, recently revealed that workers have seemingly finished laying a perimeter fence around Tesla’s 864,885-square meter plot of land in Shanghai’s Lingang Industrial Zone, paving the way for more work to be done.
The drone footage of Gigafactory 3’s perimeter fence comes just over a week after Shanghai Mayor Ying Yong and Vice Mayor Wu Qing met with Tesla’s leaders in China to check out the company’s new vehicles like the Model 3. During their visit, the officials urged Tesla and other parties involved in the facility’s construction to expedite the buildout of Gigafactory 3.
Tesla’s timeframe for Gigafactory 3 has always been ambitious. When the company initially announced that it plans to start vehicle production in the facility roughly two years after the site’s construction begins, many were dismissive. Tesla critics were quick to note that such a timeframe is too ambitious. Wall Street was equally skeptical, with Consumer Edge Research senior auto analyst James Albertine dubbing Gigafactory 3’s timeline as simply “not feasible.”
Tesla, for its part, eventually opted to change its initial timeline for the facility. Instead of taking a more conservative stance, though, Tesla did the opposite, stating in its Q3 2018 vehicle production and deliveries report that it would be accelerating the construction of Gigafactory 3 even more. Tesla further noted that it expects the project to be a “capital efficient and rapid buildout, using many lessons learned from the Model 3 ramp in North America.”
While the timeframe for Gigafactory 3 is undoubtedly ambitious, the company does enjoy the favor of the Chinese government, allowing Tesla to tap into local resources and manpower. Seemingly as a response to questions about Tesla’s ability to gain funding for the project, for example, reports emerged that local Shanghai banks have given the electric car maker low-interest loans amounting to 30% of the factory’s estimated costs. Tesla’s bid for the 864,885-square meter plot of land also went unchallenged, enabling the company to quickly prepare for the facility’s construction. With this in mind, it appears that the rapid buildout of Gigafactory 3’s perimeter fence is simply yet another sign that the government fully supports the project.
Chinese Media: After Tesla China announced the new pricing structure of Model S and X, many potential customers rush to their nearest Tesla stores to check out the vehicles, many of them were ordered right at the stores, demand largely increased. $TSLA #Tesla #China #TeslaChina pic.twitter.com/NnYUbvsbg4
— vincent (@vincent13031925) December 16, 2018
Gigafactory 3 will play a considerable role in Tesla’s expansion into the Chinese market. By producing vehicles locally, Tesla would be able to avoid the import tariffs placed on its vehicles coming from the United States, while allowing Tesla to release competitively priced cars to go against lower-priced EVs being produced by local carmakers.
China stands as the world’s largest market for electric cars, being a country that is aggressively pushing for sustainable transportation. With this in mind, Tesla’s success in the country would likely be dependent on how it could target the greater Chinese auto industry with its lower-priced vehicles. While the Model S and Model X are mostly seen as status symbols for the successful and wealthy, the luxury sedan and SUV nonetheless cater to the country’s upper class, which represents a much smaller market. With vehicles such as the Model Y and the Model 3 saturating the country from Gigafactory 3, Tesla could tap into China’s ever-growing mainstream electric car market, which is on pace to hit a milestone of 1 million EVs sold in 2018.
Watch the progress of Gigafactory 3 in the video below.
https://youtu.be/rx3mXjQg46U
Elon Musk
SpaceX Starship Version 3 booster crumples in early testing
Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
SpaceX’s new Starship first-stage booster, Booster 18, suffered major damage early Friday during its first round of testing in Starbase, Texas, just one day after rolling out of the factory.
Based on videos of the incident, the lower section of the rocket booster appeared to crumple during a pressurization test. Photos of the incident’s aftermath suggest that Booster 18 will likely be retired.
Booster test failure
SpaceX began structural and propellant-system verification tests on Booster 18 Thursday night at the Massey’s Test Site, only a few miles from Starbase’s production facilities, as noted in an Ars Technica report. At 4:04 a.m. CT on Friday, a livestream from LabPadre Space captured the booster’s lower half experiencing a sudden destructive event around its liquid oxygen tank section. Post-incident images, shared on X by @StarshipGazer, showed notable deformation in the booster’s lower structure.
Neither SpaceX nor Elon Musk had commented as of Friday morning, but the vehicle’s condition suggests it is likely a complete loss. This is quite unfortunate, as Booster 18 is already part of the Starship V3 program, which includes design fixes and upgrades intended to improve reliability. While SpaceX maintains a rather rapid Starship production line in Starbase, Booster 18 was generally expected to validate the improvements implemented in the V3 program.
Tight deadlines
SpaceX needs Starship boosters and upper stages to begin demonstrating rapid reuse, tower catches, and early operational Starlink missions over the next two years. More critically, NASA’s Artemis program depends on an on-orbit refueling test in the second half of 2026, a requirement for the vehicle’s expected crewed lunar landing around 2028.
While SpaceX is known for diagnosing failures quickly and returning to testing at unmatched speed, losing the newest-generation booster at the very start of its campaign highlights the immense challenge involved in scaling Starship into a reliable, high-cadence launch system. SpaceX, however, is known for getting things done quickly, so it would not be a surprise if the company manages to figure out what happened to Booster 18 in the near future.
News
Tesla FSD (Supervised) is about to go on “widespread” release
In a comment last October, Elon Musk stated that FSD V14.2 is “for widespread use.”
Tesla has begun rolling out Full Self-Driving (Supervised) V14.2, and with this, the wide release of the system could very well begin.
The update introduces a new high-resolution vision encoder, expanded emergency-vehicle handling, smarter routing, new parking options, and more refined driving behavior, among other improvements.
FSD V14.2 improvements
FSD (Supervised) V14.2’s release notes highlight a fully upgraded neural-network vision encoder capable of reading higher-resolution features, giving the system improved awareness of emergency vehicles, road obstacles, and even human gestures. Tesla also expanded its emergency-vehicle protocols, adding controlled pull-overs and yielding behavior for police cars, fire trucks, and ambulances, among others.
A deeper integration of navigation and routing into the vision network now allows the system to respond to blocked roads or detours in real time. The update also enhances decision-making in several complex scenarios, including unprotected turns, lane changes, vehicle cut-ins, and interactions with school buses. All in all, these improvements should help FSD (Supervised) V14.2 perform in a very smooth and comfortable manner.
Elon Musk’s predicted wide release
The significance of V14.2 grows when paired with Elon Musk’s comments from October. While responding to FSD tester AI DRIVR, who praised V14.1.2 for fixing “95% of indecisive lane changes and braking” and who noted that it was time for FSD to go on wide release, Musk stated that “14.2 for widespread use.”
FSD V14 has so far received a substantial amount of positive reviews from Tesla owners, many of whom have stated that the system now drives better than some human drivers as it is confident, cautious, and considerate at the same time. With V14.2 now rolling out, it remains to be seen if the update also makes it to the company’s wide FSD fleet, which is still populated by a large number of HW3 vehicles.
News
Tesla FSD V14.2 starts rolling out to initial batch of vehicles
It would likely only be a matter of time before FSD V14.2 videos are posted and shared on social media.
Tesla has begun pushing Full Self-Driving (Supervised) v14.2 to its initial batch of vehicles. The update was initially observed by Tesla owners and veteran FSD users on social media platform X on Friday.
So far, reports of the update have been shared by Model Y owners in California whose vehicles are equipped with the company’s AI4 hardware, though it would not be surprising if more Tesla owners across the country receive the update as well.
Based on the release notes of the update, key improvements in FSD V14.2 include a revamped neural network for better detection of emergency vehicles, obstacles, and human gestures, as well as options to select arrival spots.
It would likely only be a matter of time before FSD V14.2 videos are posted and shared on social media.
Following are the release notes of FSD (Supervised) V14.2, as shared on X by longtime FSD tester Whole Mars Catalog.
Release Notes
2025.38.9.5
Currently Installed
FSD (Supervised) v14.2
Full Self-Driving (Supervised) v14.2 includes:
- Upgraded the neural network vision encoder, leveraging higher resolution features to further improve scenarios like handling emergency vehicles, obstacles on the road, and human gestures.
- Added Arrival Options for you to select where FSD should park: in a Parking Lot, on the Street, in a Driveway, in a Parking Garage, or at the Curbside.
- Added handling to pull over or yield for emergency vehicles (e.g. police cars, fire trucks, ambulances.
- Added navigation and routing into the vision-based neural network for real-time handling of blocked roads and detours.
- Added additional Speed Profile to further customize driving style preference.
- Improved handling for static and dynamic gates.
- Improved offsetting for road debris (e.g. tires, tree branches, boxes).
- Improve handling of several scenarios including: unprotected turns, lane changes, vehicle cut-ins, and school busses.
- Improved FSD’s ability to manage system faults and improve scenarios like handling emergency vehicles, obstacles on the road, and human gestures.
- Added Arrival Options for you to select where FSD should park: in a Parking Lot, on the Street, in a Driveway, in a Parking Garage, or at the Curbside.
- Added handling to pull over or yield for emergency vehicles (e.g. police cars, fire trucks, ambulances).
- Added navigation and routing into the vision-based neural network for real-time handling of blocked roads and detours.
- Added additional Speed Profile to further customize driving style preference.
- Improved handling for static and dynamic gates.
- Improved offsetting for road debris (e.g. tires, tree branches, boxes).
- Improve handling of several scenarios, including unprotected turns, lane changes, vehicle cut-ins, and school buses.
- Improved FSD’s ability to manage system faults and recover smoothly from degraded operation for enhanced reliability.
- Added alerting for residue build-up on interior windshield that may impact front camera visibility. If affected, visit Service for cleaning!
Upcoming Improvements:
- Overall smoothness and sentience
- Parking spot selection and parking quality
SpaceX Starship Version 3 booster crumples in early testing
Tesla FSD (Supervised) is about to go on “widespread” release
