Connect with us

News

Tesla reveals design inspiration behind Cybercab’s gold color

Credit: Petersen Automotive Museum | YouTube

Published

on

An interview with Tesla’s lead designer this week has revealed why the company went with the color gold for its recently unveiled autonomous ride-hailing vehicle.

In a video shared on Tuesday, Tesla Chief Designer Franz von Holzhausen was hosted by Petersen Automotive Museum for an interview about the Cybercab, which is currently on display at the Los Angeles, California location. The longtime Tesla executive shares a handful of details about the two-seat autonomous vehicle in the video, including that it has no steering wheel, pedals, back window, and more.

Perhaps surprisingly, however, von Holzhausen also says that Tesla chose the color gold to represent the yellow of New York City’s classic yellow taxis—but with a more futuristic look.

“We chose the color gold, and it’s really a special color,” von Holzhausen says in the video. “It really reflects kind of a future version of the idea of a New York City yellow cab. It’s a future idea of that where we’ve taken that iconic yellow and created something more expressive, and more up to date.”

Advertisement

The video runs a little under 10 minutes, and von Holzhausen also shares a handful of other details, noting that you’ll someday be able to purchase or lease the car, for the amount of time you want, effectively revolutionizing transportation.

You can watch the full video with Tesla’s Franz von Holzhausen below, courtesy of the Petersen Automotive Museum below.

READ MORE ABOUT THE TESLA CYBERCAB: Tesla Cybercab to be showcased in multiple U.S. cities this weekend

Advertisement

Tesla Cybercab’s design: autonomy from charging to driving

As one Tesla engineer recently revealed, the Cybercab is set to have roughly half the parts of a Model 3, and it’s set to include more autonomous elements than just driving. Tesla has introduced a highly-anticipated inductive wireless charging system with the Cybercab, along with a self-governed cleaning system, essentially making the vehicle entirely autonomous.

Tesla initially shared the design for the Cybercab on October 10 during an event dubbed “We, Robot.” The company says it’s aiming to begin production of the vehicle in late 2026, and it hopes to reach a volume production of two million per year.

Teslarati was in attendance at the unveiling event, and we managed to catch one of the first rides in the Cybercab, as can also be seen below.

Advertisement

During the same event, Tesla also unveiled a design for the bus-sized Robovan, which Elon Musk has said features design elements inspired by Art Deco trains, but with a more futuristic touch.

What are your thoughts? Let me know at zach@teslarati.com, find me on X at @zacharyvisconti, or send us tips at tips@teslarati.com.

Tesla’s plan for added Cybercab safety measure revealed

Zach is a renewable energy reporter who has been covering electric vehicles since 2020. He grew up in Fremont, California, and he currently lives in Colorado. His work has appeared in the Chicago Tribune, KRON4 San Francisco, FOX31 Denver, InsideEVs, CleanTechnica, and many other publications. When he isn't covering Tesla or other EV companies, you can find him writing and performing music, drinking a good cup of coffee, or hanging out with his cats, Banks and Freddie. Reach out at zach@teslarati.com, find him on X at @zacharyvisconti, or send us tips at tips@teslarati.com.

Advertisement
Comments

Energy

Tesla launches Cybertruck vehicle-to-grid program in Texas

The initiative was announced by the official Tesla Energy account on social media platform X.

Published

on

Credit: Tesla

Tesla has launched a vehicle-to-grid (V2G) program in Texas, allowing eligible Cybertruck owners to send energy back to the grid during high-demand events and receive compensation on their utility bills. 

The initiative, dubbed Powershare Grid Support, was announced by the official Tesla Energy account on social media platform X.

Texas’ Cybertruck V2G program

In its post on X, Tesla Energy confirmed that vehicle-to-grid functionality is “coming soon,” starting with select Texas markets. Under the new Powershare Grid Support program, owners of the Cybertruck equipped with Powershare home backup hardware can opt in through the Tesla app and participate in short-notice grid stress events.

During these events, the Cybertruck automatically discharges excess energy back to the grid, supporting local utilities such as CenterPoint Energy and Oncor. In return, participants receive compensation in the form of bill credits. Tesla noted that the program is currently invitation-only as part of an early adopter rollout.

Advertisement

The launch builds on the Cybertruck’s existing Powershare capability, which allows the vehicle to provide up to 11.5 kW of power for home backup. Tesla added that the program is expected to expand to California next, with eligibility tied to utilities such as PG&E, SCE, and SDG&E.

Powershare Grid Support

To participate in Texas, Cybertruck owners must live in areas served by CenterPoint Energy or Oncor, have Powershare equipment installed, enroll in the Tesla Electric Drive plan, and opt in through the Tesla app. Once enrolled, vehicles would be able to contribute power during high-demand events, helping stabilize the grid.

Tesla noted that events may occur with little notice, so participants are encouraged to keep their Cybertrucks plugged in when at home and to manage their discharge limits based on personal needs. Compensation varies depending on the electricity plan, similar to how Powerwall owners in some regions have earned substantial credits by participating in Virtual Power Plant (VPP) programs.

Continue Reading

News

Samsung nears Tesla AI chip ramp with early approval at TX factory

This marks a key step towards the tech giant’s production of Tesla’s next-generation AI5 chips in the United States.

Published

on

Tesla-Chips-HW3-1
Image used with permission for Teslarati. (Credit: Tom Cross)

Samsung has received temporary approval to begin limited operations at its semiconductor plant in Taylor, Texas.

This marks a key step towards the tech giant’s production of Tesla’s next-generation AI5 chips in the United States.

Samsung clears early operations hurdle

As noted in a report from Korea JoongAng Daily, Samsung Electronics has secured temporary certificates of occupancy (TCOs) for a portion of its semiconductor facility in Taylor. This should allow the facility to start operations ahead of full completion later this year.

City officials confirmed that approximately 88,000 square feet of Samsung’s Fab 1 building has received temporary approval, with additional areas expected to follow. The overall timeline for permitting the remaining sections has not yet been finalized.

Advertisement

Samsung’s Taylor facility is expected to manufacture Tesla’s AI5 chips once mass production begins in the second half of the year. The facility is also expected to produce Tesla’s upcoming AI6 chips. 

Tesla CEO Elon Musk recently stated that the design for AI5 is nearly complete, and the development of AI6 is already underway. Musk has previously outlined an aggressive roadmap targeting nine-month design cycles for successive generations of its AI chips.

Samsung’s U.S. expansion

Construction at the Taylor site remains on schedule. Reports indicate Samsung plans to begin testing extreme ultraviolet (EUV) lithography equipment next month, a critical step for producing advanced 2-nanometer semiconductors.

Samsung is expected to complete 6 million square feet of floor space at the site by the end of this year, with an additional 1 million square feet planned by 2028. The full campus spans more than 1,200 acres.

Advertisement

Beyond Tesla, Samsung Foundry is also pursuing additional U.S. customers as demand for AI and high-performance computing chips accelerates. Company executives have stated that Samsung is looking to achieve more than 130% growth in 2-nanometer chip orders this year.

One of Samsung’s biggest rivals, TSMC, is also looking to expand its footprint in the United States, with reports suggesting that the company is considering expanding its Arizona facility to as many as 11 total plants. TSMC is also expected to produce Tesla’s AI5 chips. 

Advertisement
Continue Reading

News

Anti-Tesla union leader ditches X, urges use of Threads instead

Tesla Sweden and IF Metall have been engaged in a bitter dispute for over two years now. 

Published

on

UK Government, CC BY 2.0 , via Wikimedia Commons

Marie Nilsson, chair of Sweden’s IF Metall union and a prominent critic of Tesla, has left X and is urging audiences to follow the union on Meta’s Threads instead.

Tesla Sweden and IF Metall have been engaged in a bitter dispute for over two years now. 

Anti-Tesla union leader exits X

In a comment to Dagens Arbete (DA), Nilsson noted that her exit from X is not formally tied to IF Metall’s long-running labor dispute with Tesla Sweden. Still, she stated that her departure is affected by changes to the platform under Elon Musk’s leadership.

“We have stayed because many journalists pick up news there. But as more and more people have left X, we have felt that the standard has now been reached on that platform,” she said. 

Advertisement

Jesper Pettersson, press officer at IF Metall, highlighted that the union’s departure from X is only indirectly linked to Tesla Sweden and Elon Musk. “Indirectly it does, since there is a lot of evidence that his ownership has caused the change in the platform to be so significant. 

“We have nevertheless assessed that the platform had value for reaching journalists, politicians and other opinion leaders. But it is a microscopic proportion of the public and our members who are there, and now that value has decreased,” Petterson added.

IF Metall sees Threads as an X alternative

After leaving X, IF Metall has begun using Threads, Meta’s alternative to the social media platform. The union described the move as experimental, noting that it is still evaluating how effective the platform will be for outreach and visibility.

Pettersson acknowledged that Meta also does not operate under Sweden’s collective bargaining model, but said the union sees little alternative if it wants to remain visible online.

Advertisement

“In a perfect world, all large international companies would be supporters of the Swedish model when they come here. But unfortunately, the reality is not like that. If we are to be visible at all in this social media world, we have to play by the rules of the game. The alternative would be to become completely invisible, and that would not benefit our members,” he said. 

Continue Reading