Tesla has announced that it is starting the rollout of Track Mode, a feature of the Model 3 Performance that allows the car to perform better on a racecourse, today. In light of the feature’s release, Tesla has published a blog post outlining the science behind Track Mode, as well as the feature’s specifics.
While Tesla’s other performance-oriented upgrades like Ludicrous Mode for the Model S and X help a vehicle with straight-line acceleration, Track Mode helps the company’s electric cars handle corners better. Tesla’s blog post notes that Track Mode was designed specifically to be used on closed autocross circuits and racetracks. The company also pointed out that its goal behind the development of Track Mode was simple — they wanted to use the power of the vehicle’s electric motor and instant torque to “make cornering on the track feel just as natural as forward acceleration.”
Track Mode enables vehicles to precisely control whether torque goes to the front or the rear wheels. This allows the Model 3 Performance to instantly increase or decrease the car’s rotation in a corner. With such a system in place, racing enthusiasts would find that highly technical driving sessions on a closed circuit would be a lot easier.
Track Mode starts rolling out today
— Tesla (@Tesla) November 8, 2018
Unlike the usual Sport Modes of legacy carmakers, which usually involve the disabling of stability control, the Model 3 Performance’s Track Mode adds features to the vehicle. Tesla accomplished this by replacing the electric car’s stability control system with its own Vehicle Dynamics Controller — a software specifically developed for the company’s electric vehicles that acts as both a stability control system and a performance enhancement on the track. Tesla also provided a summary of the features that are employed by Track Mode when it is activated.
Motor Torque for Rotation
Our Vehicle Dynamics Controller continually monitors the state of the vehicle and all of the inputs from the driver to determine the driver’s intention and affect the rotation of the car in a matter of milliseconds. Track Mode relies heavily on the front and rear motors to control the car’s rotation, and we have the ability to command a 100% torque bias. When cornering, if rotation is insufficient to the driver’s request, the system controls a rear biased torque. Conversely, when rotation is excessive, we command a front biased torque.
Increased Regenerative Braking
Heavy regenerative braking may not be comfortable for day-to-day driving, but on a track, it has several key advantages. It gives the driver more authority with a single pedal, improves the endurance of the braking system, and sends more energy back into the battery, maximizing the battery’s ability to deliver large amounts of power. It also gives the Vehicle Dynamics Controller more authority to create or arrest rotation with the motors when your foot is lifted off of the accelerator pedal.
Track Focused Powertrain Cooling
The high output power required for track driving generates a lot of heat, so endurance on the track requires more aggressive cooling of the powertrain. We proactively drop the temperatures of the battery and the drive units in preparation for the track and continue to cool them down in between drive sessions. We can also allow operation of the powertrain beyond typical thermal limits and increase our refrigerant system capacity by overclocking the AC compressor into higher speed ranges.
Enhanced Cornering Power
We typically think of using brakes to slow down a car, but you can actually use them to make the car faster out of a corner. All Model 3s are equipped with open differentials, which send an equal amount of torque from the motors to both the left and right wheels. When cornering, the wheels on the inside of the corner have less load on them, which means they can provide less tractive force than the outside wheels. To prevent excess slip on this inside tire, we have to limit the torque for both wheels, leaving power on the table. In Track Mode, we simultaneously apply brake and motor torque to produce a net increase in tractive force while cornering. This is similar to how a limited slip differential works, except when using the brakes, the differential can be optimized for various driving conditions.
What is particularly exciting about the release of Track Mode is the fact that it is just the first version of the system. On its blog post, Tesla noted that Track Mode is set to improve further in the future through over-the-air updates.
When Elon Musk announced the Model 3 Performance on Twitter, he noted that the vehicle would be around 15% faster than a BMW M3 on the track. Considering the pedigree of the German-made performance sedan as well as the tendency of Tesla’s previous vehicles to throttle their performance on a track, Musk’s claims were met with a notable degree of skepticism from both avid car enthusiasts and critics alike. That said, initial reviews of the feature were notably positive.
Tesla conquered the drag strip with Ludicrous Mode. It remains to be seen if the company can do the same on the closed circuit with Track Mode. Considering the deliberate design of the feature, though, there is a pretty good chance that the Model 3 Performance would soon be just as formidable on the track as the Model S P100D is on the drag strip.
Elon Musk
NASA’s first human outpost on the Moon starts now – SpaceX on deck
NASA named the rovers, landers, and vendors that will build America’s first Moon Base.
NASA has laid out its most detailed Moon Base plan to date, describing a permanent outpost near the Moon’s south pole that the agency intends to build over the coming decade as a direct stepping stone to Mars. “The Moon Base will be America’s and humanity’s first outpost on another celestial world,” NASA Administrator Jared Isaacman said, adding that every mission crewed and uncrewed “will be a learning opportunity as we return to the lunar surface, build the infrastructure to stay, and master the skills required to live and operate in one of the most demanding and dangerous environments imaginable.”
The plan is structured in three phases involving both uncrewed and crewed missions to deliver equipment, vehicles, and infrastructure to the surface, with the first three moon base missions targeted to launch before the end of 2026.
Moon Base I, targeting fall 2026, will use Blue Origin’s Blue Moon Mark 1 lander to deliver scientific instruments to the Shackleton Connecting Ridge, the same region where Artemis astronauts will land. Moon Base II will send Astrobotic’s Griffin lander carrying more than 1,100 pounds of cargo including Astrolab’s FLIP rover to begin developing mobility systems on the surface. Moon Base III will carry the Lunar Vertex science mission on Intuitive Machines’ Nova-C Trinity lander to study lunar swirls near the south pole, with ESA and Korean science payloads aboard.
On the rover side, NASA awarded Astrolab $219 million and Lunar Outpost $220 million to build the first phase of Lunar Terrain Vehicles, with both rovers targeted for deployment to the lunar surface by 2028. Astrolab’s crewed rover weighs roughly 2,000 pounds and can reach over 6 mph. Lunar Outpost’s Pegasus rover can operate autonomously or via remote control at over 9 mph. Blue Origin separately received $188 million with an option worth $280.4 million to deliver cargo landers for rover transport.
NASA also confirmed that MoonFall, a mission deploying four survey drones to scout Artemis landing sites, has selected Firefly Aerospace to build the transport spacecraft, with a 2028 launch target.
SpaceX sits at the center of that commercial layer. SpaceX holds the NASA Human Landing System contract for the Starship-derived lander that will put astronauts on the surface under Artemis IV, currently targeting 2028. Before that can happen, SpaceX must demonstrate in-orbit propellant transfer at scale, a process requiring multiple Starship tanker launches to fuel a single mission. Water ice at the lunar south pole is central to the base’s long-term viability, as it can be converted into drinking water, breathable oxygen, and rocket fuel, directly reducing dependence on Earth resupply. That resource loop becomes far more practical if Starship can land and be refueled on or near the Moon itself.
Elon Musk has publicly stated that Starship V3, which recently completed its first flight, should be capable enough for initial Mars missions. The Moon Base plan announced Tuesday is the infrastructure layer that connects everything between those two ambitions, and SpaceX is the only American company currently contracted to build the rocket that gets humans to either destination.
A new Tesla patent that has been granted to the company this week has revealed a potential strategy for solving a major issue that could impact both the Full Self-Driving suite and Optimus.
The patent, which is No. 12,636,684, describes a “Lens Cleaning System,” and was submitted by Tesla in May 2025.
The language in the patent details a lens cleaning system that can dispense fluid and wipe it away with a wiper assembly.
Optimus can see you now… 🤖👁️
The patent for @Tesla_Optimus‘s eye structure just dropped. $TSLA pic.twitter.com/Jac4VhDmKH
— SETI Park (@seti_park) May 26, 2026
This would effectively clean any debris that would potentially impact the visibility of the cameras on Tesla automobiles or Optimus’s camera eyes. Perhaps the most pertinent example is through the Full Self-Driving suite, as debris that can accumulate on the vehicle’s exterior cameras can impact the suite’s ability to operate effectively.
This requires a remedy through manual cleaning, but this patent hints that Tesla could be planning to implement this new technology on its upcoming vehicles.
Interestingly, we have started to see it on some Robotaxi vehicles, and it will likely be included in the Cybercab, especially as that vehicle will enable full autonomy.
Back in January, the first Model Y Robotaxi units were spotted with camera washers on the side repeaters, as the video below shows fluid squirting and rinsing off any debris that is limiting visibility.
🚨 Tesla looks to have installed Camera Washers on the side repeater cameras on Robotaxis in Austin
pic.twitter.com/xemRtDtlRR— TESLARATI (@Teslarati) January 23, 2026
This hardware patent does bring up an interesting question for those of us who own Teslas with AI4 and have been told that our cars will one day be capable of full autonomy: Will this washer be available as a retrofit on already-built cars?
Perhaps the “Lens Cleaning System” patent is a good look at one way Tesla plans to combat one of the most obvious issues of autonomy that utilizes a camera-based system. For Optimus, it could be less needed as it could be manually cleaned by owners. For cars, it seems like a bigger necessity, especially as autonomy nears and Tesla gets close to launching a feature-complete FSD suite.
SpaceX’s Starlink product has just gotten its latest airline adoptee, and the move marks the successful partnership of three of the “Big Four” U.S. airlines.
American Airlines announced on Tuesday that it would utilize Starlink in more than 500 narrowbody aircraft beginning in the first quarter of 2027. These include the Airbus aircraft in its fleet, including the new A321XLR and A321neo.
With the new partnership with American Airlines, Starlink is now present on three of the largest airlines in the country: American, United, and Southwest.
Starlink gets its latest airline adoptee for stable and reliable internet access
Starlink’s VP of Enterprise Sales, Jason Fritch, said:
“We are proud to bring Starlink on board American Airlines, delivering fast and reliable internet to passengers and crew. Whether traveling for leisure or business, Starlink enables a fully connected experience gate to gate, making every flight smoother and more enjoyable.”
Additionally, American Airlines Chief Customer Officer, Heather Garboden, said:
“As a premium global airline, we are continuously seeking out world-class partners like Starlink to deliver what our customers need and want. The addition of Starlink solidifies American as a leading airline in keeping passengers connected in flight.”
Starlink has been on a tear over the past year, as it has continued to be adopted by a wide variety of airlines as a more consistent and reliable way to provide WiFi to its passengers. It has already gained a great reputation among residential users, but its biggest commercial application appears to be how it is being used in the air.
American Airlines will adopt Starlink on more than 500 of its narrowbody aircraft beginning in Q1 2027
“As a premium global airline, we are continuously seeking out world-class partners like Starlink to deliver what our customers need and want,” said American Airlines Chief… pic.twitter.com/XY2wflycc0
— TESLARATI (@Teslarati) May 26, 2026
The only airline of the Big Four not to adopt Starlink thus far is Delta, which chose to opt for the alternative, which is Amazon Leo. CEO Ed Bastian said to Bloomberg that Delta chose Amazon’s product over Starlink’s because “the opportunities, in terms of the improved bandwidth with a much lower price point than what we’ve ever seen from Starlink, will make a big difference.”
Delta will not start installing Amazon Leo until 2028.
“Of course, we expect Starlink will be warning people that we’re going to go with an inferior product,” Bastian said. “But I’m not too worried about partnering with Amazon.”
NASA’s first human outpost on the Moon starts now – SpaceX on deck
Tesla patent reveals strategy for solving major Full Self-Driving, Optimus issue
